How can we help you?

Right after your payment, your license key is sent by email to the address you used at checkout.

Still nothing after a few minutes? Open a ticket on Discord with your order number.

Your key is usually activated on the website of the product's provider. The link and the steps for your product are given with your key.

Not sure where to activate it? Ask us on Discord with your order number and we'll guide you.

1. Join our Discord: discord.gg/overlate.
2. Go to the #customer-role channel.
3. Click the Get customer role button.
4. In the form, enter your order number and the email used at checkout.

Only completed orders are accepted and each order number can be used once. You can use the button again after every new purchase.

The loader performs low-level operations that Windows Defender and third-party antivirus software flag as threats. Both must be fully disabled before using any of our products.

If you have a third-party antivirus installed (Norton, Avast, McAfee, Malwarebytes, Kaspersky…), uninstall it completely through Settings → Apps before going further.

1. Download the tool below and run it as administrator.
2. Select "Remove Windows Defender only" (A) and wait until it finishes.
3. Restart your PC when prompted.

Download DefenderRemover

1. Press Win + R, type firewall.cpl and press Enter.
2. Click Turn Windows Defender Firewall on or off in the left panel.
3. Select Turn off for both Private and Public network settings.
4. Click OK.

A restore point lets you roll Windows back to its current state if anything goes wrong.

Video guide

Step-by-step guide

1. Press Win + R, type sysdm.cpl and press Enter.
2. Go to the System Protection tab.
3. Select your C: drive in the list and click Configure.
4. Select Turn on system protection, set the disk space usage to at least 5% and click OK.
5. Back on the System Protection tab, click Create.
6. Enter a name for the restore point (e.g. Before Product Setup) and click Create.
7. Wait for Windows to finish: a confirmation message appears when it is done.

How to restore

If you need to roll back your system:

1. Press Win + R, type sysdm.cpl and press Enter.
2. Go to the System Protection tab and click System Restore.
3. Click Next, select the restore point you created and click Next again.
4. Confirm and click Finish. Your PC restarts and goes back to the saved state.

For our cheats to communicate with Windows, the required runtime packages must be installed first. Missing runtimes can stop the loader from opening, cause injection issues or make the game crash after launch.

Visual C++

"AIO Runtimes" installs every Visual C++ version you need.

Download Visual C++ runtimes

Microsoft Edge

The loader requires Microsoft Edge. If the loader does not open correctly, install Microsoft Edge and restart your PC.

Download Microsoft Edge

WebView2

If the loader does not open or shows a blank window, install Microsoft WebView2 and restart your PC.

Download WebView2

Rivatuner

Some products require Rivatuner to be installed and running as administrator during injection. Check the guide for your product before launching the game.

Download Rivatuner

GameInput

Controller support in the cheats requires Microsoft GameInput.

Download Microsoft GameInput Redistributable

DirectX

If the game or the overlay fails to initialize, install the DirectX End-User Runtime from Microsoft.

Download DirectX End-User Runtime

The loader performs low-level operations that Windows Defender and third-party antivirus software flag as threats. Both must be fully disabled before using any of our products.

Remove third-party antivirus

If you have a third-party antivirus installed (Norton, Avast, McAfee, Malwarebytes, Kaspersky…), uninstall it completely through Settings → Apps before going further.

Disable Windows Defender

1. Download the tool below and run it as administrator.
2. Select "Remove Windows Defender only" (A) and wait until it finishes.
3. Restart your PC when prompted.

Download DefenderRemover

Disable Windows Firewall

1. Press Win + R, type firewall.cpl and press Enter.
2. Click Turn Windows Defender Firewall on or off in the left panel.
3. Select Turn off for both Private and Public network settings.
4. Click OK.

Windows Exploit Protection settings can interfere with the loader. Every option must be set to Use Default (On) or Use Default (Off): nothing should be forced on or off manually.

Steps

1. Press Win, search for Exploit Protection and open it.
2. In the System settings tab, go through each option and set it to Use Default.
3. Switch to the Program settings tab and check if any programs are listed. For each one, open its settings and set every option to Use Default.
4. Restart your PC after making the changes.

Check these requirements before downloading or injecting any of our products.

Supported Windows versions

• Windows 10: versions 2004, 20H2 and 22H2.
• Windows 11: versions 21H2, 22H2, 23H2, 24H2 and 25H2.
• To use the spoofer, you need Windows Pro or higher: Disk Spoof uses methods that are not available on lower editions.

Hardware

• Keep at least 2 GB of RAM free while the game is running.
• 16 GB of RAM or more is recommended for smoother use.
• Keep your GPU drivers up to date.
• Keep your mouse and peripheral drivers up to date.

Required software

Install them from Install Runtimes:

• Visual C++ runtimes.
• Microsoft Edge.
• WebView2 if the loader does not open.
• Rivatuner for the products that require it.
• DirectX End-User Runtime if the game or overlay fails to initialize.

Security requirements

Complete the security setup before injecting:

• Remove any third-party antivirus that may block the loader files.
• Configure Windows Defender and the Firewall as described in Disable Antivirus.
• Configure Exploit Protection as described in Exploit Protections.
• Disable the required Windows protection features as described in Disable Protections.

Game requirements

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Apex Legends and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Arc Raiders and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Fortnite and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open your Call of Duty game (BO7, BO6, MW3 or Warzone) and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Marvel Rivals and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open PUBG: Battlegrounds and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Troubleshooting: black screen

If PUBG opens on a black screen, close the game and delete the Movies folder:

1. Go to your game folder: Game Folder\TslGame\Content\Movies
2. Delete the Movies folder.
3. Launch the game again.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Rust and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Rainbow Six Siege and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Game build (QB)

Rainbow Six Siege generates a unique game build per user, called a QB. Depending on your build, some bugs or crashes can happen with our cheat that do not affect other users.

If you get crashes or initialization errors, contact our support and include:

• The RainbowSix.exe file from C:\Users\USERNAME\AppData\Local\Ubisoft\r6s\. To get there quickly, press Win + R and type %LocalAppData%\Ubisoft\r6s\
• A description of the problem and when it happens.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• The game must be in Borderless or Windowed mode, not fullscreen.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).
• Your system needs at least 2 GB of free RAM while the game is running.

1. Install and open Rivatuner

Install and configure Rivatuner before going further. The full setup is in this guide:

2. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key and click Inject.
3. Wait for the confirmation message.
4. Close the loader before opening the game: leaving it open can increase the risk of detection.

3. Launch the game

1. Open Wardogs and set the display mode to Borderless or Windowed in the video settings.
2. The cheat injects automatically while the game is loading.
3. Press Insert to open or close the menu.

Troubleshooting: ESP bugged when zooming the scope

If the ESP is bugged when you zoom in with the scope, disable the Picture in Picture setting in the game.

Shortcuts

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• You need Windows Pro or higher: Disk Spoof uses methods that are not available on lower editions.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).

1. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key.
3. Configure the spoofer options as needed.
4. Click Inject and wait for the confirmation message.
5. Close the loader before opening the game: leaving it open can increase the risk of detection.

2. Launch the game

Open your game. The spoofer is active as soon as the injection is confirmed.

Static Seed

The spoofer settings include a Static Seed option. When it is on, your hardware serials are always spoofed to the same values across sessions: useful for accounts that need a consistent hardware identity.

If you get banned while using Static Seed, reset your seed before playing again:

1. Open the loader and go to the spoofer settings.
2. Click Random Static Seed once to generate a new seed.
3. Inject and continue as usual.

These codes appear next to Load Driver Error #58765, in the format #58765|0x[CODE]. Always include the full code when contacting support.

Fix for 0xC0000115 (hypervisor detected)

1. Open Command Prompt as administrator.
2. Run bcdedit /set hypervisorlaunchtype off
3. Reboot and try again.

Your code is not listed, or the steps did not fix it? Contact support with the full error code shown by the loader.

Contact support

A clean Windows installation is the most reliable way to fix issues caused by corrupted system files, leftover drivers or misconfigured security settings. This guide uses the official Microsoft Media Creation Tool.

What you need

• A USB drive with at least 8 GB of free space: everything on it will be erased.
• A working internet connection to download the installation files.
• Your Windows product key, if your license is not linked to a Microsoft account or to your motherboard.

Step 1: download the Media Creation Tool

Download the tool from Microsoft for your version of Windows:

Windows 10 Media Creation Tool Windows 11 Media Creation Tool

Step 2: create the bootable USB

1. Plug in your USB drive.
2. Run the downloaded tool as administrator (right-click → Run as administrator).
3. Accept the license terms.
4. Select Create installation media for another PC and click Next.
5. Choose your language, edition and architecture (64-bit), then click Next.
6. Select USB flash drive and click Next.
7. Select your USB drive in the list and click Next.
8. Wait while the tool downloads Windows and writes it to the USB drive. It can take several minutes depending on your connection.
9. Click Finish: your bootable USB is ready.

Step 3: boot from the USB

1. Restart your PC and enter the BIOS/UEFI with the right key during startup (usually Del, F2 or F12: check your motherboard manual).
2. Set the USB drive as the first boot device, or use the one-time boot menu (usually F11 or F12) to select it directly.
3. Save and exit: your PC boots from the USB drive.

Step 4: install Windows

1. Select your language and keyboard layout, then click Next.
2. Click Install now.
3. Enter your product key if asked, or click I don't have a product key if your license is linked to your Microsoft account or motherboard.
4. Select the Windows edition you have a license for and click Next.
5. Accept the license terms and click Next.
6. Select Custom: Install Windows only (advanced).
7. Select the partition where Windows is currently installed (usually the largest one, the C: drive), click Delete, then select the unallocated space and click New → Apply.
8. Select the new partition and click Next.
9. Windows installs and restarts automatically. Follow the on-screen setup to finish.

After the installation

Once Windows is set up, complete the full setup guide before using any of our products.

RivaTuner Statistics Server (RTSS) is required by some of our products. It must be installed, configured and running as administrator before injecting.

Install

Download RTSSSetup.exe

Open the settings

Once installed, Rivatuner runs in the background. Its icon is either in the taskbar near the clock or in the hidden icons tray: click the arrow (^) next to the clock to expand it if you do not see it.

Click the Rivatuner icon to open the settings window.

Configure

In the settings window, set Application detection level to None.

Keep it running

Some internet providers, work networks and school networks block required connections. If a product tool or a download fails to connect, a VPN fixes it in many cases.

We recommend Cloudflare WARP: it is free, lightweight and needs no account.

Install Cloudflare WARP

1. Download the installer from the official Cloudflare page.
2. Run the installer and follow the on-screen steps.
3. Once installed, WARP opens in the system tray.

1.1.1.1 - Cloudflare WARP

Turn WARP on

1. Click the WARP icon in the system tray.
2. Click the toggle to turn WARP on.
3. Wait a few seconds for the connection.

Use WARP

1. Turn WARP on as described above.
2. Retry the download or connection step that was failing.
3. Keep WARP on until the product is fully injected, then turn it off.

Troubleshooting

• WARP does not connect? Turn it off and on again.
• WARP is installed but outdated? Reinstall it from the link above.
• Still not working? Contact support.

The System Diagnostics tool speeds up troubleshooting and collects the files support needs.

Download

Download SystemDiagnostics.exe

Tool options

When to use it

• Before contacting support, so you can send full diagnostics and logs right away.
• To check the HWID change after using a spoofer.
• When you suspect a corrupted download.

When a blue screen happens, Windows can save a small dump file that helps us find the cause. Make sure it is enabled, then get the file after a crash.

Enable the minidump

1. Press Win + R, type sysdm.cpl and press Enter.
2. Go to the Advanced tab and click Settings under Startup and Recovery.
3. Under Write debugging information, select Small memory dump (256 KB).
4. Make sure the dump file path is %SystemRoot%\Minidump.
5. Click OK and restart your PC if asked.

Get the minidump file

After the blue screen, run the System Diagnostics Tool with option 4 (Copy BSOD Minidumps). It copies the files to a folder of your choice: compress it into a ZIP and attach it to your support ticket, with any other file asked on the error page.

You followed the troubleshooting steps and the issue is still there? Open a ticket on our Discord.

What to include

Sending everything right away avoids back-and-forth:

• Product name: the product you bought (and your order number).
• Game and launcher: the game you tried to run and how you launch it.
• Windows version: type winver in the Start menu and take a screenshot.
• Error message: the exact error code or message shown by the loader.
• Screenshot of the error.
• System logs: run the System Diagnostics Tool with Option 3 (Copy System Logs). For driver errors, include the driver logs too.
• Recent changes: Windows or driver updates, antivirus changes, or new software installed before the issue started.

Your license key is sent to you by email (check your spam folder).

1. Create an account on tzproject.com.
2. Verify your email from a computer.
3. Open Redeem and enter your license key.

Installation video (English)

Installation video (French)

Full message: "This FiveM build is currently not supported by TZ. Please wait for the update or change your server."

You have three options:

• Wait until TZ supports the current FiveM build.
• Connect manually to another server that uses an older, supported build.
• Change your game build manually (steps below).

Change your game build

1. Close FiveM.
2. Go to your FiveM application data folder.
3. Open CitizenFX.ini.
4. Find the line SavedGameBuild=
5. Change the number to 3095, so the line reads SavedGameBuild=3095.
6. Save the file.
7. Reopen FiveM.

If the ESP lags or blinks, or the aimbot does not work properly, go through these fixes in order:

1. Enable an FPS counter, so the FPS are visible in your clip.
2. ESP settings: enable Draw Dead and set View Distance to 1000.
3. Aimbot settings: enable Target Dead and set Target if I have to 1 HP.
4. Disable full-screen optimizations: right-click the game shortcut → Properties → Compatibility → check Disable full-screen optimizations.
5. Limit your FPS if they are high: cap them at 144–180 in the NVIDIA Control Panel (video below).
6. Enable V-Sync: Menu → Settings → V-Sync.
7. Graphics: Resolution → Native, Aspect Ratio → Auto.
8. Close conflicting software, such as Lossless Scaling.
9. Registry fix (advanced): open the Registry Editor, go to HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM and create a DWORD (32-bit) value named DisableThrottling set to 1. Restart your PC.
10. Reset your setup if needed: inject TZ or TZX, do not load a custom config, and enable ESP and Aimbot manually.

How to cap your FPS (NVIDIA)

Your network or the server may be blocking the connection to TZ. Use a VPN or proxy, such as Proton VPN or Cloudflare WARP (1.1.1.1).

Use Defender Control v2.1 to turn off Windows Defender:

1. Download the file below. The ZIP password is sordum.
2. Extract it and run DefenderControl.exe.
3. Click Disable Windows Defender, and you are set.

Download Defender Control v2.1

TZ Streamproof lets you use TZ while streaming or recording: when it is set up correctly, the TZ overlay and visuals do not appear in OBS recordings, livestreams or clips.

How to use it

1. Use the TZ Testing Version.
2. Make sure Steam is running before injecting.
3. Open OBS.
4. Set your source to Game Capture.
5. In the Game Capture properties, disable Capture third-party overlays (see below).

Disable "Capture third-party overlays"

1. In OBS, right-click your Game Capture.
2. Click Properties.
3. Uncheck Capture third-party overlays (such as Steam).

This stops OBS from capturing the TZ overlay.

Important settings

• Use Game Capture only. Do not use Display Capture or Window Capture.
• Launch the game normally through Steam.
• Inject only after Steam is running.

TZ still appears on stream

Possible causes:

• You use Window Capture or Display Capture.
• Steam is not running.
• Your TZ version is outdated.
• External overlays are still enabled in OBS.

OBS shows a black screen

1. Restart OBS.
2. Restart the game.
3. Change the Game Capture mode.
4. Run OBS as administrator.

We support every 2FA app, but keeping your 2FA codes safe is your responsibility.

1. Recovery file

When you enable 2FA on the TZ website, a recoveryphrase.json file is downloaded automatically. Use it to revoke your 2FA, even if you lost your codes.

2. Google Authenticator

Lost your phone or the app? Follow this video to recover your codes:

3. Apple authenticator

1. Open the Passwords app on your iPhone.
2. Go to the Codes section.
3. Your codes are linked to your Apple ID, so they stay available even on a new device.

4. Other 2FA apps

Using another app and can't find your codes? Search for a recovery tutorial for that specific app.

Link your Lurker menu to your account once: your configs are saved in the cloud and load back on any PC.

1. In game, open the Lurker menu, go to Settings and copy your menu ID.
2. Go to lurkermenu.xyz and sign in with Discord.
3. Open Menu configs, paste your menu ID and click Link.
4. Save your config: it is stored in the cloud.
5. Back in game, your config is already there, on any PC.

Video tutorial

For redENGINE and its premium menus (Phaze, Nexus…). Your license key is sent to you by email (check your spam folder).

1. Create an account on redengine.net.
2. Open Redeem and enter your license key.
3. Follow the installation video below.

1. Create an account on keyser-dashboard.com.
2. Enter your license key on the website.

Your license key is sent to you by private message.

1. Create an account on lumiaa.wtf.
2. Follow the instructions on the website to install your product.

Download the Lumia loader

1. Create an account on ovix.one.
2. Log in and open License or Redeem.
3. Enter your license key.
4. Download the files once the key is activated.

1. Create an account on ovix.one.
2. Log in and enter your license key on the website.
3. Download the files once the key is activated.

Your account details are given in this order:

Email : Rockstar password : Email password : 2FA

Outlook Webmail 2FA tool

Your license key is sent to you by email (check your spam folder).

1. Create an account on redengine.net.
2. Open Redeem and enter your license key.
3. Then follow the Unban and spoofer setup video.

Banned on FiveM, or setting up the redENGINE spoofer? Follow this video:

Before you start

Make sure you completed every step of the setup guide, in order, before going further.

Requirements

• You need Windows Pro or higher: Disk Spoof uses methods that are not available on lower editions.
• For controller support, Microsoft GameInput must be installed (see Install Runtimes).

1. Run the loader

1. Open the cheat loader as administrator.
2. Enter your key.
3. Configure the spoofer options as needed.
4. Click Inject and wait for the confirmation message.
5. Close the loader before opening the game: leaving it open can increase the risk of detection.

2. Launch the game

Open your game. The spoofer is active as soon as the injection is confirmed.

Static Seed

The spoofer settings include a Static Seed option. When it is on, your hardware serials are always spoofed to the same values across sessions: useful for accounts that need a consistent hardware identity.

If you get banned while using Static Seed, reset your seed before playing again:

1. Open the loader and go to the spoofer settings.
2. Click Random Static Seed once to generate a new seed.
3. Inject and continue as usual.